 |
 |
 |
|
Discover Snorkeling March 14, 28 April 18
Discover Scuba March 14, 28 April 18 May 16 June 6, 27 July 18
Refreshers March 13, 27 April 17 May 15 June 5, 26 July 17
Pool & Classroom March 12, 13, 14 March 26, 27, 28 April 16, 17, 18 May 14, 15, 16 June 4, 5, 6 June 25, 26, 27 July 16, 17, 18 August 6, 7, 8 August 27, 28, 29
Jasper Open Water June 12, 13 July 10, 11 July 31, Aug 1 August 14, 15 September 4, 5
Nanaimo Open Water March 13, 14 April 17, 18 May 15, 16 June 12, 13 July 17, 18 August 14, 15
|
|
 |
|
 |
|
 |
 |
 |
|
Rental gear for scuba diving and snorkeling is provided at a nominal fee and are serviced regularly to provide you trouble free diving. Rental gear includes masks, snorkels, fins, boots, BCD's, regulators, wetsuits, drysuits, tanks, weights, lights, and more. Click Here for rental rates.
|
|
 |
|
 |
 |
 |
 |
|
We provide quality breathing air for diving
and it is tested on a regular basis. Air fills are just $7.00 per fill or an
air card can be purchased for $60.00, giving you 10 fills.
Nitrox is available, up to 40%. Each fill is
$12.00 & requires a nitrox c-card as proof of nitrox certification. You can
also purchase a 10-fill card for $110.00. We mix our Nitrox using the Continuous
Blending Method.
Decompression gases are also available up to
100%. Proof of Certification is required.
Trimix is also available. You must be a
tri-mix certified diver in order to purchase.
|
|
 |
|
 |
 |
 |
 |
|
You probably spent a lot of money when you purchased your scuba diving gear. So keeping it in good working condition is not only important for your safety, but also to maintain the investment that you've already made for the gear.
It is important that your BCD not only hold air properly, but that other mechanisms, such as over-pressure valves and the power inflator, are functioning properly as well. A sticky power inflator could have dire consequences in the open water! Your BCD should be serviced on a regular basis. Depending on the use, this could be as much as on an annual basis. We will clean, inspect, and adjust your BCD according to the manufacturer's guidelines.
Similarly your regulators should be inspected and serviced on a regular basis. Dirt, sand, and salt can impede a regulator's performance. A free-flowing regulator at depth is the last thing you want to worry about while diving. Some manufacturer's will provide parts warranty for regulators that are serviced on a regular basis. This cost savings will more than pay for the labour costs in the long run. We will inspect, clean, and adjust your regulators according to the manufacturer's guidelines.
Tip: Upon returning from your vacation, bring your regulators & BCD in for it's regular servicing. Then when you put it into storage until your next holiday, you don't have to worry about the salt and sand causing damage to the delicate parts! This is a better scenario than leaving it to the last minute, rushing to the dive shop days before your departure, and finding out the service parts are on backorder, and your gear is not serviced before your vacation!
|
|
 |
|
 |
 |
 |
 |
|
We do Visual Plus inspections on scuba
cylinders using our Visual Eddy Machine. This machine will allow us to find
invisible cracks in your cylinders neck threads that are not visible by the
naked eye. Visual inspections are required every year. If you are unsure
when you tank was last visually inspected, bring it in and one of our staff
will assist you.
Tank hydro inspections are required by law
every five years.
If your tank is due, bring it in and we'll test it for you.
We also do tank valve cleaning and
rebuilding. This service should be done when you tank is due for a hydro
inspection or if it becomes contaminated.
Another service we provide is tank cleaning
and tumbling. This service is only required if your tank requires it or if you
request it.
|
|
 |
|
 |
|